RS Kappa (5 – 9)

Infinity RS Kappa serien blev produceret fra 1987-1989. Det er den originale Kappa serie, ej at forveksle med Kappa II serien og de (under Harman) dansk producerede Kappa 60 til 100 modeller.

De to største modeller, Kappa 8 og 9, adskiller sig i design fra de tre mindre. De har ret flade, lukkede, kabinetter, der står vinklet bagud på en stålfod. De er blevet kendt (og populære) for at have en voldsom bas, kombineret med meget fint detaljeret mellem- og højtone. Begge kræver kraftige forstærkere der kan klare meget lave impedanser.


RS 9 Kappa

Nominal Impedance: 4 to 6 ohm
Power Rating: 60-340 watts RMS
Efficiency: 102 dB SPL @1 watt, 1 meter
Crossover Frequencies: 80Hz, 800Hz, 4500Hz
Frequency Response: 29Hz-45kHz +/-3d
1x – SEMIT Supertweeter
1x – EMIT Tweeter
1x – 3″ Edgewound Voice Coil Polydome Midrange Driver
1x – 5″ Polypropylene/graphite Diaphram Polygraph
2x – 12″ Cast Frame , L/C Tuned Woofers
Dimensions: 151.1cm(H) x 54.6cm(W) x 20.3cm(D)

Infinity_RS_9-9a_Kappa_Technical_Sheet


RS 8 Kappa

Nominal Impedance: 4 to 6 ohms
Power Rating: 50-250 watts RMS
Efficiency: 89 dB @1 watt, 1 meter
Crossover Frequencies: 80Hz, 800Hz, 4500Hz
Frequency Response: 33Hz-45kHz +/-3dB
1x – EMIT Tweeter
1x – 3″ Edgewound Voice Coil Polydome Midrange Driver
1x – 5″ Polypropylene/graphite Diaphram Polygraph
1x – 12″ Cast Frame , L/C Tuned Woofer
Dimensions: 120.65cm(H) x 52.83cm(W) x 20.3cm(D)

Infinity_RS_8_Kappa_Technical_Sheet


RS 7 Kappa

Nominal Impedance: 4 to 6 ohms
Power Rating: 40-200 watts RMS
Efficiency: 88 dB @1 watt, 1 meter
Crossover Frequencies: 800Hz, 4500Hz
Frequency Response: 37Hz-45kHz +/-3dB
1x – EMIT Tweeter
1x – 3″ Edgewound Voice Coil Polydome Midrange Driver
1x – 12″ Cast Frame , L/C Tuned Woofer
Dimensions: 94cm(H) x 43.18cm(W) x 30.48cm(D)

Infinity_RS_7_Kappa_Technical_Sheet


RS 6 Kappa

Nominal Impedance: 4 to 6 ohms
Power Rating: 30-150 watts RMS
Efficiency: 88 dB @1 watt, 1 meter
Crossover Frequencies: 800Hz, 4500Hz
Frequency Response: 37Hz-45kHz +/-3dB
1x – EMIT Tweeter
1x – 3″ Edgewound Voice Coil Polydome Midrange Driver
1x – 10″ Graphite/Polypropylene Woofer
Dimensions: 63.5cm(H) x 38.1cm(W) x 26.67cm(D

Infinity_RS_6_Kappa_Technical_Sheet


RS 5 Kappa

Nominal Impedance: 4 to 6 ohms
Power Rating: 20-100 watts RMS
Efficiency: 87 dB @1 watt, 1 meter
Crossover Frequencies: 4500Hz
Frequency Response: 49Hz-45kHz +/-3dB
1x – EMIT Tweeter
1x – 6.5″ (16.51cm) IMG Woofer
Dimensions: 43.18cm(H) x 26.67cm(W) x 25.4cm(D)

Infinity_RS_5_Kappa_Technical_sheet